BLACK OUT TAIL LIGHTS FULL
BLACK OUT TAIL LIGHTS PLUS

Make sure to allow each layer of clear coat to dry completely between applications.

This provides better protection for the spray tinting.

Although some tinting professionals claim that 3 to 5 layers of clear coat should be enough, others argue that you should apply between 7 and 10 layers for the best results.

Once you have finished spraying, allow the clear coat to dry for about 20 minutes before applying the next layer. You can use a clear coat with a glossy finish, if you like.

Once the final layer of spray tint has dried and you have cured the taillights, place the taillight back on the work surface and spray them with a light layer of clear coat. X Research source The process of applying the clear coat is very similar to applying the spray tint. Remember to remove any masking tape before moving on to the next step.Īpply the clear coat.This step is optional but will give you a better idea of what your finished tail lights will look like. When you are happy with the level of tinting, leave the lights outside in the sun to cure for 45 minutes to an hour.In the majority of cases, three coats of spray tint will be enough to achieve the desired level of tinting. Then apply a third layer of tint and let that dry completely. When you are done, let the lights stand for 20 to 30 minutes until they are dry to the touch. Once the first layer of tint is dry, you can apply a second layer of tint.Leave this first layer of tint to dry for 20 to 30 minutes. Spray a light, even layer all over both tail lights, making sure both lights achieve the same color. Give the can of spray tint a vigorous shake, then hold it about seven inches away from the light, for best coverage. X Research source Once the lights are completely dry and you have masked off the applicable areas (if necessary), place the tail lights on a stable work surface to begin the spraying process. A good tip when using the sandpaper is to let it soak in some water before sanding - this will make the paper more flexible and easier to use.Īpply the spray tint.Give the lights a wipe down with some cleaning product - such as rubbing alcohol, gasoline, or window cleaner - and allow the lights to dry.The lights should now feel completely smooth and have a hazy, cloudy color. Finally, take a piece of 2000 grit sandpaper and sand the lights a final time, using smooth, firm strokes.When you're done, wipe the taillight clean and allow it to dry. Next, take a piece of 1000 grit sandpaper and repeat the sanding process with it.Check to see if you have sanded the surface of the lights evenly. When you're done, wipe the lights clean with a cloth or some paper towel and allow them to dry. Repeat the sanding process for each taillight. You can use a little dish soap if you like. Wet a piece of 800 grit sandpaper and rub it against the taillight until the surface is dull and scuffed up. X Research source Before spraying your taillight, you will first need to sand them to provide a completely smooth surface for the spray tint.

BLACK OUT TAIL LIGHTS FULL

Need more LEDs to complete your look? Check out our full range of products custom designed for your Jeep Wrangler JL.Sand the taillights.

BLACK OUT TAIL LIGHTS PLUS

Plus the load equalizers on our tail lights are pre-wired so you won’t get stuck with pesky warning lights popping up on the dash every time you start your car.īlack Series Jeep Wrangler JL Tail Lights Features: Like many of our products, our Black Series Jeep Wrangler JL tail lights are easy to install, just plug-and-play into the factory tail light socket, and you’re good to go. The Black Series JL tail lights provide full functionality, including driving lights, brake lights, reverse lights, and blinking turn signals. Featuring an aggressive, blacked-out design, our LED tail lights for the JL sport a show-stopping hourglass shape, black bezel color, and a smoked lens to make your Jeep stand out from the pack. ORACLE Lighting's Black Series LED Jeep Wrangler JL Tail Lights will take your factory-standard vehicle to the next level. If you have the factory LED Jeep Wrangler JL tail lights, you will have to make modifications. Designed for: 2018–22 Jeep Wrangler JL without the factory LED package.

Black out tail lights